Parameters; B3 System Administration - Setting Cos (Class Of Service Parameters - Panasonic KX-TVP50 Installation Manual

B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
B3 SYSTEM ADMINISTRATION - SETTING COS
(CLASS OF SERVICE) PARAMETERS
The COS - Class of Service parameters define the set of services that are available to
Subscribers. A maximum of 64 (1-64) classes can be specified. A class of service number can
be assigned for each mailbox. More than 1 Subscriber can share the same class of service.
• COS number 63 is only available to the Message Manager while COS number 64 is only
available to the System Manager.
• The following special features can only be utilised on a COS basis by following the
procedure below.
• Message Waiting Notification
• External Message Delivery
• Auto Forwarding
COS number 63 for the Message Manager can only utilise the Message Waiting
Notification feature.
COS number 64 for the System Manager cannot utilise any of these features.
To access Class of Service Numbers 1-64, follow the menu path as shown:
System Administration Top Menu - 1 - 2 - COS No. (1-64)
Note
In Tables 36 and 37, sub-parameters are underlined. These sub-parameters can be assigned
only when the corresponding authorisation parameter is set to "Yes".
186
SYSTEM ADMINISTRATOR'S GUIDE