Panasonic KX-TVP50 Installation Manual page 205

Parameter
Busy Coverage
Mode
No Answer
Coverage
Mode
Notes
An operator-seeking call is always first transferred to Operator 1. The call is then
transferred to Operator 2 and Operator 3 respectively, depending on system programming.
"Next Operator" cannot be set for "No Answer Coverage Mode" of Operator 3.
Operator's Parameters - Night Mode - Operator 1, 2, 3
Same as Day Mode.
Operator's Parameters - Lunch Mode - Operator 1, 2, 3
Same as Day Mode.
Operator's Parameters - Break Mode - Operator 1, 2, 3
Same as Day Mode.
SYSTEM ADMINISTRATOR'S GUIDE
Value Range
(Default)
1. Hold Specifies how calls are handled when the Operator 3
2. No Answer extension is busy.
Coverage
3. Call Waiting
1. Hold - The caller is automatically placed on hold and
4. Disconnect
Message
2. No Answer Coverage - The caller is offered one of the
(Hold)
3. Call Waiting - Operator 3 is signaled when another call
4. Disconnect Message - The VPS disconnects the call
1. Caller Select Specifies how Operator 3 calls are handled when not
2. Leave Message answered within the time period set through the
3. Disconnect "Operator No Answer Time" mode.
Message
(Caller Select)
1. Caller Select - This selection allows the caller to leave
2. Leave Message - The caller is instructed to leave a
3. Disconnect message - The caller is disconnected after
B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
Table 43
Description/Function
the Operator 3 extension is called again.
options specified by the No Answer Coverage Mode.
is waiting using the Call Waiting feature of the PBX.
after playing "Thank you for calling."
a message or call another extension.
message in Operator 3's mailbox.
playing "Thank you for calling."
205