Print All Of The Vps Parameters (Gprn); Program Version Display (Vers) - Panasonic KX-TVP50 Installation Manual

7.2 UTILITY COMMANDS
Note
The data terminal used must be equipped with communications software that supports the
Xmodem file transfer protocol. The command can be cancelled by Typing [\] before entering
the sending mode. Once the sending mode has been selected, use the cancel command of the
communication software being used.

7.2.9 Print All of the VPS Parameters (GPRN)

This command is used to print all VPS parameter settings (output to screen).
Type GPRN, then Press RETURN.
$ GPRN
0: All Parameters
1: Mailbox Setting
2: Class of Service Setting
3: Port Service Setting
4: Service Setting - Auto Attn. Setting
5: Service Setting - Custom Service Setting
6: Service Setting - Caller ID Call Routing
7: System Parameter Setting - System Group Assignment
8: System Parameter Setting - Day Service, Holiday, Daylight Saving Time
9: System Parameter Setting - Prompt Setting
10: System Parameter Setting - System Caller Name Announcement
11: System Parameter Setting - Others
12: Hardware Setting
13: System Reset Clear Parameter
Please select : 1

7.2.10 Program Version Display (VERS)

This command is used to display the version numbers of the flash memory and main ROM.
Type VERS, then Press RETURN.
$ VERS
V.P.S. PROGRAM VERSION
MAIN FLASH MEMORY : VE11AA (2.00)
MAIN ROM :
Note
The numbers are examples only. Your system will show different numbers.
130
: VE010C (1.02)
SYSTEM MAINTENANCE AND TROUBLESHOOTING