Panasonic KX-TVP50 Installation Manual page 115

2.
When the port answers Press [#6 ], then the mailbox number you wish to change.
3.
Enter your password (if programmed), then Press [#].
You are now inside the mailbox.
4.
For mailbox management, Press [5].
5.
To change the owner's name, Press [3].
6.
The system will say: "Owner's name is not recorded. Record owner's name at the tone."
7.
State the owner's first and last name at the tone.
8.
Press [1] when finished.
• The VPS tells you the customer's name.
9.
Press [2] to accept.
TEST THE SYSTEM
Before backing up the system, call each extension to see that each port functions as it
should. Check for proper greetings and call transfers.
FINAL SETUP
6.2 SETTING UP MAILBOXES
115