Panasonic KX-TVP50 Installation Manual page 226

B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Parameter
Message
Waiting Lamp
Ports
Message
Waiting Lamp
for Every
Message
Max. Digits for
Callback No.
Callback No.
Entry Interdigit
Time-Out
System
Callback No.
Other Parameters - External Message Delivery
Used to control the handling of External Message Delivery calls.
226
Value Range
(Default)
Port No. Specifies the port numbers used for the Message Waiting
(1, 2) Notification Lamp feature.
The VPS turns on the Message Waiting Lamp of the
extension using the port specified in this field. At least 1
port must be specified.
1. No When set to "Yes," the VPS will turn on the Message
2. Yes Waiting Lamp of the extension each time a new message
(Yes) is recorded in the mailbox. This will occur even if the
Message Waiting Lamp was not turned off from a
previous message. This setting is useful when the first
attempt is unsuccessful.
When set to "No," the VPS will turn on the Message
Waiting Lamp for the first message only. The VPS will
not turn on the lamp for subsequent messages until the
Subscriber has accessed the VPS to retrieve the messages
stored there.
1-48 digits Specifies the maximum number of digits the caller can
(20) enter as a callback number. This number will be
displayed on beepers if the "Beeper Callback No. Entry
Mode" is enabled.
1-10 s Sets the maximum allowable time between each digit on
(5) Beeper Callback No. Entry. If the caller does not enter
any digits within the specified time, the VPS will not
accept entry of any additional digits.
Up to 32 digits Specifies a telephone number displayed on the
(None) Subscriber's beeper as a callback number when "Type" is
set to "Beeper."
Note: If "Beeper Callback No. Entry Mode" is enabled
through COS, the callback number entered by the caller
will be displayed on the destination beeper instead of the
System Callback No. However, if the caller fails to enter
a callback number, the System Callback No. will be
displayed.
Table 58
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE