Panasonic KX-TVP50 Installation Manual page 103

To light Message Waiting Lamp at Operator 1's extension: Assign Mailbox 998 to
Operator 1's extension. This will notify Operator 1 of messages left in the GDM.
Operators 2 and 3:
For KX-TD816 and KX-TD1232, Operators 2 and 3 can be assigned to a floating
number that is assigned to a ring group.
Return to Program - Service Settings - Auto. Attn. Setting Menu:
Enter The Number : = 2
Program - Service Settings - Auto. Attn. Setting - Operator's Parameters Menu
SELECT ITEM AND PRESS KEY
SELECT ITEM AND PRESS KEY
Enter the data using the table below as a guide. The table below is for Operator 1 as
example. Please refer to it for Operators 2 and 3.
Description
Operator
Service
Operator's
Extension
Operator's
Mailbox No.
Operator No
Answer Time
Busy
Coverage
Mode
CUSTOMISING THE SYSTEM
1. Day Mode
2. Night Mode
3. Lunch Mode
4. Break Mode
1. Operator 1
2. Operator 2
3. Operator 3
Value Range
(Default)
1. Disable
2. Enable
(Enable)
1-5 Digits
(0)
2-5 Digits
(998)
10-60 s
(30)
1. Hold
2. No Answer Coverage
3. Call Waiting
4. Disconnect Message
(Hold)
5.4 AUTOMATED ATTENDANT PARAMETERS
Table 22
Description/Function
Enables or disables operator service.
Specifies the operator's extension.
Specifies Operator 1's mailbox number. Also
specifies General Delivery Mailbox.
If a call transferred to Operator 1, 2, or 3 is not
answered within this period of time, the VPS uses
the No Answer Coverage Mode.
Specifies the treatment of calls when Operator 1 is
busy. If "Call Waiting" is chosen, Operator 1 is
signaled when another call is waiting using the Call
Waiting feature of the PBX.
*1
103