Back Panel Removal - Thermal Arc Fabricator 211i Service Manual

DISASSEMBLY PROCEDURE

6.05 Back Panel Removal

!
Read and follow safety information in Section 5.03 before proceeding with disassembly.
1. Remove the screws on the back .
2. Remove Rear Panel screws .
3. Remove The Ground Wire.
4. Wire from Power PCB.
Disconnect the two wires from switch.
5. Remove The Screw and Disconnect the pipe from gas inlet.
3
Manual 0-5158
1
6-5
2
Ar
5
4
FABRICATOR 211i
Art # A-11353
DISASSEMBLY PROCEDURE