Table of Contents
Advertisement
Getting Started
Name and Function of Parts
Camera
Front side
A
Camera securing hole (4 locations)
This hole is used for mounting the camera on the wall.
B
Cable connecting hole, cap
Remove the cap and pull out the cables from this
hole for connection.
(A Page 17)
C
Fall Prevention Wire
Connects the camera to the wall. Secure the
camera tightly to the anchor bolts used to mount
the fall prevention wire on the wall. (A Page 18)
D
AC24V Power Cable
Connects the camera to AC24V power. (A Page 20)
E
Alarm Input/Alarm Output Cable (x8)
This cable is for alarm input and alarm output.
(A Page 22)
Cable color
Brown
Red
Orange
Yellow
Green
Blue
Purple
Gray
A
B
C
D
E
A
F
Signal Name
Input 1
Input 1 (COM)
Input 2
Input 2 (COM)
Output 1
Output 1 (COM)
Output 2
Output 2 (COM)
H
G
F
LAN Cable
This connects the unit to the network.
(A Page 22)
G
Dome Cover
The dome cover is a delicate object. Handle it
with care.
Note ：
● It is covered with a protective sheet during
shipment. Do not remove this sheet until
installation is complete.
H
Dome Cover Fixing Screws (x4)
Advertisement
Table of Contents
