JVC VN-V686WPU Instructions Manual page 39

Jvc outdoor ptz ip dome camera instructions
Hide thumbs Also See for VN-V686WPU:
Table of Contents

Advertisement

C
Black Level
D
Gamma
Active Gamma
Level
E
Enhance
Frequency
F
Enhance Level
G
Color Level
For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.
[Setting range : 0 to 2]
:
Memo
● If the black level is set to 0 , this may be too low depending on the
connected device, or dark area will become complete black.
● When using MPEG4 images, set to either 1 or 2 .
To alter the appearance of dark areas in a video image, adjust the gamma curve.
0
: Gamma correction suitable for CRT is performed.
1
: Gamma correction suitable for some LCDs is performed.
2
: Do not perform gamma correction. This setting is suitable for some
LCDs.
Active : The most appropriate gamma correction is applied according to the
darkness of the screen. Select the level under [Active Gamma Level].
[Setting values : 0, 1, 2, Active]
:
Memo
● The set value is fixed when the [Monitor Type] B is set to LCD1 , LCD2 ,
or CRT .
This adjusts the effect when [Gamma] D is set to Active .
Objects with little luminance differenceBDecrease the number
Objects with large luminance differenceBIncrease the number
[Setting range : -5 to 0 to 5]
:
Memo
● The color may appear different from the actual one depending on the object.
● Noise interference and hue changes may appear prominent depending on the
brightness of the object but this is not a malfunction.
● This feature can only be configured when [Gamma] D is set to Active .
For setting the type of edge enhancement.
Low
: Enhanced edges become thicker.
High
: Enhanced edges become thiner.
[Setting values:Low, High]
:
Memo
● The set value is fixed when the [Monitor Type] B is set to LCD1 , LCD2 ,
or CRT .
For setting the intensity of edge enhancement.
Larger value
: Increases the intensity of edge enhancement.
Smaller value
: Decreases the intensity of edge enhancement.
[Setting range : -5 to 0 to 5]
For adjusting the color level.
Larger value
: Increases the color level.
Smaller value
: Decreases the color level.
[Setting range : -5 to 0 to 5]

Advertisement

Table of Contents
loading

Table of Contents