Table of Contents
Advertisement
Getting Started
Precautions (continued)
Transporting the unit
Remove the connecting cables when
transporting the unit.
When transporting the unit, turn off the power
of the system.
Pack the unit with cushioning material so as
to avoid shock when transporting.
Handle the unit with care and do not subject it
to vibration or shock.
Transportation
Do not throw away the original box of the unit.
Keep it and use it for transporting the unit in
future.
As the camera unit is of an easily rotatable
structure, secure the camera unit inside the
dome cover such that it does not rotate
before transporting. Otherwise, an error may
occur during camera operation.
A
Face the heat release vents upward and
secure the lens section with tape.
B
Insert cushioning material wrapped with air
caps (approx. 50 mm x 200 mm) at two
opposite sides of the camera.
A
B
Cushioning material
Secure with
tape
Copyright Protection
With the exception of the user being the
copyright holder or when permission such as
for duplication has been granted by the
copyright holder, permission is required in
principle for the duplication, modification, or
transmission of copyrighted video and audio
data.
Unauthorized duplication, modification, or
transmission of copyrighted material may
constitute a copyright infringement, and the
user may be liable to compensate for any
damages. When using copyrighted video/
audio data, be sure to check the license
agreement of the copyrighted material
thoroughly.
When rights or rights holders are involved
with regard to the targeted duplicating
subject, permission may be required for
shooting or using (processing) it. Be sure to
check the licensing conditions thoroughly.
Maintenance
Turn off the power before performing
maintenance.
Wipe using a soft cloth.
Wiping with thinner or benzene may melt or
tarnish its surface. For tough stains, wipe
using a cloth that is dipped into a neutral
detergent diluted with water, followed by
wiping with a dry cloth.
When the same position is monitored for 24
hours continuously over a long period, the
increased contact resistance on the
horizontal rotation section may cause noise
interferences in the images and operation
from the computer may become unstable. As
such, this product is equipped with an auto
cleaning function that performs cleaning once
a week.
Advertisement
Table of Contents
