System Features; Power 750 Express System Features - IBM Power 750 Technical Overview And Introduction

1.5 System features

This section describes the features available on the Power 750 and Power 760 systems.

1.5.1 Power 750 Express system features

The following features are available on the Power 750 Express:
A 5U 19-inch rack-mount system enclosure
One to four 8-core DCMs:
– 8-core (2 x 4-core) 3.5 GHz processor DCM (FC EPT8)
– 8-core (2 x 4-core) 4.0 GHz processor DCM (FC EPT7)
Additional processor considerations:
POWER7+ DDR3 Memory DIMMs (two per feature):
– 8 GB (2 x 4 GB), 1066 MHz (FC EM08)
– 16 GB (2 x 8 GB), 1066 MHz (FC EM4B)
– 32 GB (2 x 16 GB), 1066 MHz (FC EM4C)
Active Memory Expansion with POWER7+ hardware accelerator (FC 4792)
Six hot-swappable, 2.5-inch, small form factor, SAS disks or SSD bays per system
One hot-plug, slim-line, SATA media bay per system
Redundant hot-swap 1,925 Watts AC power supplies
Choice of Integrated Multifunction Card options (maximum one per system):
– Dual 10 Gb Copper and Dual 1 Gb Ethernet (FC 1768)
– Dual 10 Gb Optical and Dual 1 Gb Ethernet (FC 1769)
– Dual 10 Gb Copper and Dual 1/10 Gb (RJ45) Ethernet (FC EN10)
– Dual 10 Gb Optical and Dual 1/10 Gb (RJ45) Ethernet (FC EN11)
One serial port on the Integrated Multifunction Card
Two USB ports on the Integrated Multifunction Card plus another USB port on the base
system unit
DASD and Media backplane with 6 x 2.5-inch HDD or SSD (FC EPTS):
– One to six SFF SAS DASD or SSDs (mixing allowed)
– Two integrated SAS controllers to run SAS bays
– One slim bay for a DVD-RAM (required)
– One integrated SATA controller to run the DVD-RAM
Two HMC ports
Each system must have a minimum of one processor DCM (eight cores).
There is a maximum of four DCMs per system (32 cores).
If you have more than one processor DCM in one server, then all processor DCM
features must be identical: All 3.5 GHz processor DCMs (FC EPT8) or all 4.0 GHz
processor DCMs (FC EPT7).
All the cores must be activated using FC EPTC, FC EPTD, FC EPTE or FC EPTF.
A minimum of 8 GB per core is required to use FC EPTC or FC EPTD zero-priced
1-core activation features.
Chapter 1. General description
7