IBM Power 750 Technical Overview And Introduction page 45

Weights are as follows:
– T42 base empty rack: 261 kg (575 lb)
– T42 full rack: 930 kg (2045 lb)
For the T42 rack, various door options are available as shown in Figure 1-9.
Trim kit
(no front door) Plain front door
FC 6272 FC 6069
Figure 1-9 Door options for the T42 rack
The 2.0 m Rack Trim Kit (FC 6272) is used, if no front door is used in the rack.
The Front Door for a 2.0 m Rack (FC 6069) is made of steel, with a perforated flat front
surface. The perforation pattern extends from the bottom to the top of the door to enhance
ventilation and provide some visibility into the rack. This door is non acoustic and has a
depth of about 25 mm (1 in).
OEM front door: This door is also available as an OEM front door (FC 6084).
The 2.0 m Rack Acoustic Door feature (FC 6249) consists of a front and rear door to
reduce noise by about 6 dB(A). It has a depth of about 191 mm (7.5 in).
The High-End Appearance Front Door (FC 6250) provides a front rack door with a field
installed Power 780 logo designed to be used when the rack will contain a Power 780
system. The door is not acoustic and has a depth of about 90 mm (3.5 in).
High end: For the High-End Appearance Front Door (FC 6250) the High-End
Appearance Side Covers (FC 6238) should be used to make the rack appear as a
high-end server (but in a 19-inch rack format instead of a 24-inch rack).
The FC ERG7 provides an attractive black full height rack door. The door is steel, with a
perforated flat front surface. The perforation pattern extends from the bottom to the top of
the door to enhance ventilation and provide some visibility into the rack. The door is non
acoustic and has a depth of about 134 mm (5.3 in).
Acoustic doors 780 logo
(front and rear) front door
FC 6249 FC 6250
Chapter 1. General description
Optional
front door
FC ERG7
31