Infiniband Host Channel Adapter - IBM Power 750 Technical Overview And Introduction

Hide thumbs Also See for Power 750:
Table of Contents

Advertisement

Ethernet
FC Switch
and Fibre
Ethernet Switch
Channel
Cables
Ethernet
CEC or I/O Drawer
FC
CEC or I/O Drawer
Rack
Figure 2-12 Comparison between existing Fibre Channel and network connection and FCoE connection
Table 2-18 lists the available Fibre Channel over Ethernet adapter. It is a high-performance
Converged Network Adapter (CNA) using SR optics. Each port can provide network interface
card (NIC) traffic and Fibre Channel functions simultaneously. NPIV support is available, but
requires VIOS for all operating systems.
Table 2-18 Available FCoE adapter
Feature
code
5708
EN0H
For more information about FCoE, see An Introduction to Fibre Channel over Ethernet, and
Fibre Channel over Convergence Enhanced Ethernet, REDP-4493.

2.7.11 InfiniBand host channel adapter

The InfiniBand architecture (IBA) is an industry-standard architecture for server I/O and
inter-server communication. It was developed by the InfiniBand Trade Association (IBTA) to
provide the levels of reliability, availability, performance, and scalability necessary for present
and future server systems with levels significantly better than can be achieved by using
bus-oriented I/O structures.
InfiniBand (IB) is an open set of interconnect standards and specifications. The main
IB specification is published by the InfiniBand Trade Association and is available at the
following location:
http://www.infinibandta.org/
InfiniBand is based on a switched fabric architecture of serial point-to-point links, where these
IB links can be connected to either host channel adapters (HCAs), used primarily in servers,
or to target channel adapters (TCAs), used primarily in storage subsystems.
The InfiniBand physical connection consists of multiple byte lanes. Each individual byte lane
is a four-wire, 2.5, 5.0, or 10.0 Gbps bidirectional connection. Combinations of link width and
byte-lane speed allow for overall link speeds from 2.5 Gbps to 120 Gbps. The architecture
72
IBM Power 750 and 760 Technical Overview and Introduction
Fibre Channel
Cable
Fibre Channel (FC)
Device or FC Switch
Ethernet
Cable
Ethernet Device/
Switch
CCIN
Adapter description
2B3B
10 Gb FCoE PCIe Dual Port adapter
2B93
PCIe2 4-Port (10 Gb FCOE & 1 Gb
Ethernet) SR & RJ45 adapter
Ethernet
FCoE Switch
Cables
FCoE
CEC or I/O Drawer
Rack
Slot
PCIe
PCIe
Fibre Channel
Cable
Fibre Channel (FC)
Device or FC Switch
Ethernet
Cable
Ethernet Device/
Switch or FCoE
Device/Switch
Size
OS support
Full height
AIX, Linux
Full height
AIX, IBM i,
Linux

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power 760

Table of Contents