Teeter Hang Ups EP-550 Assembly Instructions Manual page 17

MISASSEMBLY CHECK
WARNING
!
If your Teeter Hang Ups Inversion Table looks like either of these images, your inversion table has
been misassembled and is unfit for use. Improper assembly could result in serious injury or death!
Image B
Image A
Go back to Step 5 for instruction.
Go back to Step 4 for instruction
Demonstrates that the Table Bed has been assembled
Demonstrates that the Roller Hinges have been assembled
into the A-Frame backwards so the Main Shaft is not resting
upside down into the Table Bed and must be corrected.
on the Crossbar and must be corrected.
* Inversion Table images may
vary slightly from your model.
The EP-550 is shown here.
16