Teeter Hang Ups EP-550 Assembly Instructions Manual page 18

FIGURE 21
FIGURE 22
STEP 7 Attach the Accessories
Attach the Angle Tether (OPTIONAL)
• The tether will come pre-assembled to the A-Frame.
• Unfold the adjustable tether and clip it to the U-Bar on the underside of the Table Bed
(Figure 21).
• Refer to the Owner's Manual for guidance with pre-setting your angle of rotation.
Attach the Head Pillow (OPTIONAL)
• Attach the Head Pillow by securing the Velcro Straps through the holes in the Table Bed
(Figure 22). The position of the pillow can be adjusted depending on the user.
17