Turning On The System; Changing Channels - JVC HM-DSR100RU Instructions Manual

User and
Installation Guide
T O
URNING N THE
1. Turn ON the TV and any other installed
equipment.
2. Turn ON the recorder. The power light on the
recorder front panel illuminates.
The remote must be in SAT mode to
Note:
use it to turn ON the recorder.
C C
HANGING HANNELS
If the program you select to view is security locked, you must enter the system
password to view it.
Either: Press the
button to change channels.
All unpurchased channels are
automatically skipped. You will see
only the channels in the active
Favorites List.
or
Enter the desired three-digit channel
number using the number pad buttons.
When changing channels to a
Note:
channel number that has fewer than
three digits (for example channel
number 2 or 10), you must enter zeros
to make these channel numbers three
digits (for example 002 or 010).
Page 3-4
S
YSTEM
Up or Down arrow
Remote
Buttons
POWER
Remote
Buttons
1 2 3
4 5 6
7 8 9
0
Menu Options
Menu Options