JVC HM-DSR100RU Instructions Manual page 136

User and
Installation Guide
F D
INDING THE IRECTION AND
When determining the approximate location of the satellites, you need to find the azimuth (South,
Southeast, or Southwest direction to the satellites) and elevation (angle up to the satellites) from
your location. "Azimuth" is also called "direction." This Guide uses the term "direction".
Finding the satellites is easy. You first need to connect the recorder to your TV, and turn on
the recorder and TV. Tune your TV to channel 3 or 4. See Wiring Setups on page 7-21 for
more information.
Use the
Point Dish and Signal Strength
satellites from your location. After you complete the installation of the satellite antenna,
you can then fine-tune the aiming of your satellite antenna to receive the strongest signal.
To open the
Point Dish and Signal Strength
1. Press the Mode button to set the recorder
to the SAT mode.
2. Press the button to open the
Menu
.
Main Menu
3. Select the
System Setup
4. Select the
Installation
5. Select the
Point Dish and Signal
option.
Strength
6. Use the arrow buttons to highlight the
ZIP Code field. Use the number pad
buttons to enter each digit of your
ZIP code.
7. As soon as you enter the last digit of your ZIP
code, the recorder displays the direction
(azimuth) and elevation on the menu. Write
down these numbers and go on to the next
section.
Direction or
Azimuth :__________
Elevation:__________
Page 6-10
E
LEVATION
menu to find the direction and elevation of the
option.
option.
menu, do the following.
Remote
Buttons
MODE
MENU
6
6
1
1
1
1 Point Dish/Signal
1 2 3
4 5 6
7 8 9
0
Menu Options
System Setup
Installation
Example
ZIP Code
80155
Example
Azimuth Angle: 191
Elevation Angle: 42