Security Features - JVC HM-DSR100RU Instructions Manual

S F
ECURITY EATURES
A S F
BOUT ECURITY
Security features let you make sure your system is being used the way you want it to be
used.
You can use two levels of security:
You can lock your system, so that only those who know the password can access locked
features (see below).
You can set up a Personal Identification Number (PIN) at the Service Center to keep
unauthorized users from calling and ordering services (see Service Center Security on
page 4-29).
P S
ARENTAL AND YSTEM
You can set system locks to keep anyone who does not know the password from:
Viewing one or more specified channels.
Viewing programs with certain rating or extended rating (content) codes.
Purchasing additional cost services such as pay per view programs.
Using the recorder front panel buttons.
To set locks, you must do the following:
1. Create the channel or program locks (you do not need to do this if you wish to lock only pay
per view services).
2. Lock the recorder front panel buttons, if you wish.
3. Lock the system. This puts the locks you have created into effect, and also automatically
locks the purchase of additional cost services.
Once the system is locked, anyone who wants to access the locked services must enter the
password.
First you set the locks; then you lock the system.
You must lock your system in order to put all locks into effect.
If you want to lock only pay per view services, you do not need to create any
special locks. Just lock the system, and this automatically locks pay per
view services.
EATURES
L
OCKS
Using the System

Security Features

4
Page 4-19