JVC HM-DSR100RU Instructions Manual page 84

User and
Installation Guide
D S D
ISH IGNAL IAGNOSTIC
This test verifies that your system has good signal reception.
Select the Dish Signal
you to wait until the test is completed. If the system signal reception is normal, the
recorder displays a message that says "Signal Reception OK." If the signal reception is
not working correctly, the recorder displays a failure message. In this case, see the
Diagnostic Test section of the Problems and Solutions Tables on page A-18.
T C
ELEPHONE ONNECTION
Select the
Phone Connection
asking you to wait until the test is completed. If the telephone connection is correct, the
recorder displays a message that says "Phone Connection OK." If the telephone is not
connected properly, the recorder displays a failure message. In this case, see the
Diagnostic Test section of the Problems and Solutions Tables on page A-18.
M U D
AIN NIT IAGNOSTIC
This test verifies that the recorder is working correctly.
Select the
Main Unit Test
asking you to wait until the test is completed. If the main unit is working correctly,
the recorder displays a message that says "Main Unit OK." If the main unit is not
working correctly, the recorder displays a failure message. In this case, call the JVC
Service Center for assistance.
This test may temporarily distort the TV picture.
Note:
Page 4-38
T
EST
option to begin the test. The recorder displays a message asking
3
D T
IAGNOSTIC EST
option to begin the test. The recorder displays a message
4
T
EST
option to begin the test. The recorder displays a message
5
3 Dish Signal
4 Phone Connection
5 Main Unit Test