JVC HM-DSR100RU Instructions Manual page 118

User and
Installation Guide
C M
REATE A ANUAL
To program the recorder's built-in timer manually, do the following:
1. Press the button until the remote is in
Mode
the SAT mode.
2. Load a cassette into the cassette loading slot.
Make sure the record safety tab is intact.
If the tab is missing, cover the hole with
adhesive tape before inserting the cassette.
3. Press the Menu button to open the
Main Menu .
4. Highlight the Timers
The Event Timer Management
displayed.
5. Press the Up or Down
highlight the Create
the Select button. The
Event Timer screen will be displayed.
6. Press the arrow buttons to highlight the
desired type of event timer (VCR,
Auto-Tune, or Reminder). Then press
the button.
Select
7. Press the or
Up Down
highlight the desired timer frequency.
Next press the
Select
press the arrow button.
Right
Page 5-26
E T
VENT IMER
option and press Select
screen will be
arrow button to
option. Then press
Create a Manual
arrow button to
button and then
Remote
Buttons
MODE
MENU
.
7
SELECT
SELECT
W
Menu Options
7 Timers
Type
VCR
Auto-Tune
Reminder
Frequency
Once
Weekly
Daily
Mon-Fri