JVC HM-DSR100RU Instructions Manual page 40

User and
Installation Guide
A L
DDING OCAL OR
To add local broadcast or cable channels, do the following:
button until the remote
1. Press the Mode
is in SAT mode.
2. Press the button to open the
Menu
.
Main Menu
3. Select the
System Setup
4. Select the
Installation
5. Select the
Add Local Channel
you are setting up your local channels for
the first time or switching options in the
Select Cable/Broadcast
steps in order. Otherwise, go to step 8 to
add channels to the
list.
Channels
6. Press the arrow button to move the
Left
highlight into the
list.
Broadcast
7. Press the or
Up Down
highlight either the
option or the appropriate
option (Standard, HRC, or IRC)(Contact
your cable TV provider for information on
whether you have a standard, HRC or IRC
cable system. Press the
choose the channel option.
You can add either cable (Standard, HRC, or IRC) or broadcast channels,
Note:
not both. If you add one type of channel and then select another option, the
Local Channels
be correct for the option you selected. So, whenever you change the option, you
should also edit the
Page 3-14
C C
ABLE HANNELS
option.
option.
option. If
list, follow the
Selected Local
Select Cable/
arrow button to
Broadcast Channels
Cable Channels
button to
Select
list will not change. In that case, the channels in the list would not
Selected Local Channels
Remote
Buttons
MODE
MENU
6
6
1
1
2
2 Add Local Chan.
E
SELECT
list.
Menu Options
System Setup
Installation
Broadcast Channels
Standard Cable Channels
HRC Cable Channels
IRC Cable Channels
Selected