Procurve Switch Poe Xl Module Configurations With - HP ProCurve 2520 Planning And Implementation Manual

Planning and Implementation for the Switch xl PoE module
Planning Your PoE Configuration
ProCurve Switch PoE xl Module Configurations with a
610 EPS
ProCurve Switch 5300xl
ProCurve Switch xl PoE
modules
600 RPS/EPS
Figure 6-3. Example of an 610 EPS Powering Two Modules
In this example there are two modules connected to the 610 EPS. Each module
will be supplied with 408 watts of PoE power to be distributed to each modules
24 ports at 15.4 watts per port, because each module is connected to a different
pair. One module to one port of pair A and one module to one port of pair B.
6-4
LED Mode
Std PoE PoE EPS
Status
Link 1 Mode 2 3 4 5 6
PoE
hp procurve
PoE
xl module
J8161A 7 8 9 10 11 12
Source of Watts
Power Available
External PoE 408/each
Power module
Supply
LED Mode
PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX Std
13 14 15 16 17 Link 18 Mode Link 1 Mode 2 3
PoE
hp procurve
xl
PoE
xl module
module
19 20 21 22 23 24 J8161A 7 8 9
# of Ports Powered and
Average watts/Port
24 @ average 15.4 W each
PoE PoE EPS PoE-Ready 10/100-TX Ports (1-24) – all ports are HP Auto-MDIX
Status
4 5 6 13 14 15 16 17 Link 18 Mode
xl
module
10 11 12 19 20 21 22 23 24
Redundant # of Ports
Powered and Average watts/
Port
None