Power Configuration For Hp Procurve 5406Zl/8206Zl Poe/Poe+ Switches - HP ProCurve 2520 Planning And Implementation Manual

Planning and Implementation for the 5400zl/8200zl Switches
Planning Your PoE Configuration
Switch Model 5406zl/ Number of Power Supplies
8206zl
(110 or 220 volts)
Mixed PoE Power
(NOT Recommended))
(With External Power
Supplies Added>
Power Configuration for HP ProCurve 5406zl/8206zl
PoE/PoE+ Switches
N o t e
Using PoE power supplies J8712A and J8713A with J9306A in PoE/PoE+
systems is NOT supported. Use the J9306A zl power supply for systems
providing both PoE and PoE+ power.
Table 10-4 shows the maximum PoE/PoE+ power available for various power
configurations.
Table 10-4. 5406zl/8206zl Power Configurations for PoE/PoE+
Switch Model 5406zl/ Number of Power Supplies
8206zl
@ 110 - 127 V
PoE/PoE+ Power
(54v) Internal
10-4
J8712A J8713A
(220 volts only)
1 1
3 0
4 0
0 3
0 4
J9306A
@ 200-240 V
1 0
2 0
0 1
0 2
Redundancy Model
N + 1 Redundant PoE Power
or
Full
N+1 System and Redundancy -
up to 273 W, see page 10-
13
N+1 Up to 546 W
Full Up to 546 W
N+1 Up to 1800 W
Full Up to 1800 W
Redundancy Model
N + 1 or Redundant PoE/PoE+
Full Power
- None
Full Up to 300 W
- None
Full Up to 900 W
Non-Redundant
Power Available
Non-Redundant
PoE Power
1173 W
819 W
1092 W
2700 W
3600 W
Non-Redundant
Power Available
Non-Redundant
PoE/PoE+ Power
300 W
600 W
900 W
1800 W