Hp Procurve 3500-Poe Switches - HP ProCurve 2520 Planning And Implementation Manual

Introduction
PoE Capabilities of the Products

HP ProCurve 3500-PoE Switches

The HP ProCurve Switch 3500-48G-PoE (J9473A), has 44 Integrated PoE auto-
sensing 10/100 Base-T RJ-45 ports and four ports of Gigabit dual-personality
Uplink ports, either RJ-45 or SFP.
The HP ProCurve Switch 3500-24G-PoE (J9471A), has 20 Integrated PoE auto-
sensing 10/100 Base-T RJ-45 ports with four ports of Gigabit dual-personality
Uplink ports, either RJ-45 or SFP.
These switches also support some pre-standard PoE devices. For a list of these
devices, see the FAQs for your switch model. This feature is the default and
you must disable it if you do not want to use it. For example:
ProCurve(config# no power pre-std-detect
For more information, refer to the Management and Configuration Guide
which is on the ProCurve Web site. To display the list of downloadable
manuals, click on the following link: www.hp.com/go/procurve/manuals.
(You may want to bookmark this Web page for easy access in the future.)
The dual-personality ports have either auto-sensing 10/100 Base-T RJ-45 or
mini-GBIC connectivity. The mini-GBIC ports do not support PoE. If any of
the mini-GBIC ports are used the corresponding RJ-45 port will not be supplied
with PoE power.
1-13