4
4
5
6
Erasing Irregular Paper Sizes
1
2
4-62
Specifying Common Settings
Enter a name © press [OK].
The maximum number of characters that you can enter for a key name is 10.
The assigned name appears on the size key.
NOTE
•
For instructions on entering characters, see "Entering Characters from the Touch
Panel Display," on p. 2-29.
•
If you press [OK] without entering any characters, the size key name reverts to its
current name (default S1 to S5).
Press [OK].
Press [Done] repeatedly until the Basic Features screen
appears.
(Additional Functions) © [Common Settings].
Press
If necessary, see the screen shot in step 1 of "Initial Function at Power ON," on p.
4-20.
Press [M] or [L] until [Registering Irregular Size for Stack
Bypass] appears © press [Registering Irregular Size for Stack
Bypass].
If necessary, see the screen shot in step 2 of "Registering and Editing Irregular
Paper Sizes," on p. 4-58.