Canon Color imageRunner C3220 Reference Manual page 376

6
6-62 MEAP Settings
The installed application information is printed.
**********************
System Information
**********************
Application Name : PortalService
Application ID/System Application Name : 0906ebfc-d39e-4149-9cc5-3ca
a528fcd03
Application Version : 1.0
Status : Active
Installed on : Tue Apr 01 15:53:24 GMT+09:00 2003
Vendor : Canon Inc.
License Status : Unnecessary
Maximum Memory Usage : 220
Registered Service : com.canon.meap.service.portalservice.PortalServ
ice
Items printed for each application are as follows:
•
Application Name: Prints the name of the application.
•
Application ID/System Application Name: Prints the system application's file
name or the application ID of a standard application.
•
Application Version: Prints the application's version number.
•
Status: Prints the status of the application.
- Installed: The application has been installed successfully.
- Active: The application is running.
- Stopped: The application is idle.
•
Installed on: Prints the date and time the application was installed.
•
Vendor: Prints the name of the application vendor.
•
License Status: Prints the license status.
- Installed: An effective license has been installed.
- Invalid: The license is invalid.
- Overlimit: The installed license has exceeded its user limit.
- Unnecessary: You do not need a license to run the application.
•
License Expires After: Prints the expiration date of the license. If License Status
shows "Unnecessary" as its value, the expiration date is not printed.
•
License Upper Limit: Prints the upper license limit for each counter. If License
Status shows "Unnecessary" as its value, the upper license limit is not printed.
•
Counter Value: Prints the current value for each counter. If License Status shows
"Unnecessary" as its value, the current counter value is not printed.
•
Maximum Memory Usage: Prints the maximum amount of memory that can be
used by each application. The Maximum Memory Usage number is printed in
kilobytes (KB).
•
Registered Service: Prints the service registered on the MEAP framework from
the application. The Registered Service is printed only if there is data that
corresponds to it.