2
2
3
2-32
Entering Characters from the Touch Panel Display
Press [M] or [L] to display the desired symbol that you want
to enter.
Press [é].
To enter a space, press [Space].
To move the cursor, press [ ] or [ ].
To enter alphanumeric characters, press the entry mode drop-down list © select
[Alphanum.] © enter the desired characters.
The characters you entered are displayed, as shown below.
NOTE
•
If you make a mistake when entering characters, press [ ] or [ ] to position the
cursor © press [Backspace] to delete the characters © enter the correct
characters.
•
To delete all of the characters you have entered, press
•
The available entry modes, and the maximum number of characters that you can
enter vary, depending on the type of entries you are making.
(Clear).