Console Operation And Features - Diamondback APEX Ic8 Owner's Manual

Computer controlled indoor cycle
Table of Contents

Advertisement

Up & Down Arrow Keys. The UP and DOWN arrow keys allow the user to adjust the on-screen values in
the program setup mode. While opera ng the Heart Rate Control program, the arrow keys will adjust
the target heart rate. During all other programs, the arrow keys will increase or decrease the resistance.

CONSOLE OPERATION AND FEATURES

Power Up
Provide power to the unit by pedaling at a rate of fi een (15) revolu ons per minute or greater. The console will light all seg-
ments of the LCD display for two seconds and a short beep will sound.
Reset
You can reset all of the values back to zero by holding the START/STOP key down for 3 seconds. This ac on will erase all save
data, including user-defi ned workout profi les.
Program Selec on Mode
A er powering up, the console will enter the main screen or program selec on mode, where the program tles will be fl ash-
ing. Use the UP or DOWN arrow keys to highlight the desired program and press the ENTER key launch the program setup
mode for the selec on.
Program Op ons
The APEX Ic8 off ers four program categories: MANUAL, H.R.C. (Heart Rate Control), PROGRAM (Pre-programmed Profi les)
and USER (User Defi ned/Custom). Within these categories, H.R.C and PROGRAM off er several op ons (see the chart below).
When the unit is powered on, the small cluster of program tles on the LCD display will fl ash, promp ng the user to make a
selec on.
APEX Ic8 Owner's Manu
21
al
CONSOLE

Advertisement

Table of Contents
loading

Table of Contents