Console Operation - Diamondback 510Sr Owner's Manual

MP3/iPod Input Jack and Speakers
The 510 console offers an on‐board amplifier and pair of stereo speakers which can be connected to an Mp3 player, iPod® or iPhone®.
Connect one end of a male‐to‐male stereo cable (not included) to the headphone jack (or audio out) on the device. Plug the other end of the
cable into the port located inside the media bay.
Sound levels are controlled by the device so be sure to check the internal device settings if the noise level is not satisfactory.
Tilt Viewing
The 510 is equipped with a tilting console to provide all users with a clear and direct view of the displays. The console rotates at the base. To
tilt the console, firmly grasp the top of the console. Do not over‐extend the rotation as damage may occur.
CONSOLE OPERATION
NOTE: It is advised that new users read this entire section prior to beginning their first workout session.
Glossary of Terms
Banner/Idle Mode The Banner Mode may also be described as the Idle Mode. Power is supplied to the console and all segments will
light in sequence to indicate that the unit is ready for operation. Programs and Setting modes may be launched
from the Banner Mode. The Banner Mode will time out in four (4) minutes and enter Power Save Mode if no input
is received in the form of console key presses or pedal rotation.
Demo/Idle Mode The Demo Mode operation is identical to the Banner Mode except the console will never power off and enter
Power Save Mode. Primarily used for in‐store displays, the console ships with the factory default of "Demo Mode
On". The user may choose between the Demo Mode and the Banner Mode in Console Setup mode (see the
section titled Console Setup on page 26).
Power Save Mode The unit will be plugged in, but no power will be supplied to the console. Pressing any key on the console or
rotating the pedals will launch the Banner Mode.
LCD An acronym for liquid crystal display. The 510 display screen is an LCD with integrated backlighting for excellent
visibility.
Watts A unit of measurement which correlates to the rate energy is generated.
Resistance Level Also called intensity level. The load applied to the workout by the unit. The higher the intensity level, the higher
the resistance. There are sixteen (16) resistance levels.
510Sr Owner's Manual
23