Diamondback APEX Ic8 Owner's Manual page 13

ASSEMBLY INSTRUCTIONS
FINAL INSTALLATION & SET UP
• Moving and Posi oning the Unit. Move the APEX Ic8 into the
desired fi nal posi on by carefully raising the rear end of the unit
un l the wheels located on the front stabilizer contact the fl oor.
Leave room around the unit for safe opera on and suffi cient air
fl ow.
• Leveling the unit. Level the unit by turning the leveling knob
right or le un l the unit is level.
• Plug one end of the power adaptor (M) into a 120V power
source. Plug the opposite end into the power input jack found
on the back end of the plas c housing near the rear stabilizer.
APEX Ic8 Owner's Manu
Leveling Knob
11
al