Intel R2000LH2 Quick Installation User's Manual page 11

General Installation Process
A. Remove the Rack Handles
A
Remove the two screws securing
the rack handle from the chassis
and then remove the rack handle.
C. Install Internal SSD(s)
A
B
Place the Solid State Drive in
the carrier.
C
Secure the Solid State Drive
with the four screws.
D. Install the Front End Module
B
A
A
Push the front end module into place.
B
Secure the front end module with six screws.
Internal Fixed 2.5" SSD Drive Carrier
B. Slide the Front End Module
A
A
Remove the two
screws to release
the Solid State
Drive carrier.
C
B
B
A
B
F
D
Slide the Solid
D E
State Drive carrier
into the chassis.
E. Install the Rack Handles
A
Align the rack handle with the two holes on the side of the
server system and secure the rack handle to the server system
with two screws.
7
A
Remove the six screws
securing the front end
module from the chassis.
B
Slide the front end of
the module forward a
A
little.
E
Secure the Solid F
Connect the cables.
State Drive carrier
with the two screws.
A