Menu Operations - JVC DLA-M2000LU Operating Instructions Manual

Menu Operations

Menu Transition Diagram in Video Menu Mode
Main menu in Video Menu Mode
5 ∞
5 ∞
2 3
Menu
Image adj.
Image adj. 3 Brightness 12
Brightness
Setting Contrast Contrast 12
Sharpness
Color temp.
Sharpness 1
Color
Options
Color 12
Tint
Language
All reset Tint 12
Information
All reset
5
∞
5
5 ∞
2 3
Menu
Setting 1
Image adj.
3
Position
Setting Position
Tone
Aspect change
Color temp.
Tone
Decoder
Options
Aspect change
Tracking
Language
Screen Setting 2
HDTV
Information
5 ∞
2 3
5 ∞
Setting 1
Position
3
Tone
Aspect change
Decoder
Setting 2
5 ∞
2 3
Menu
3
Color temp.
Image adj.
Setting R-Gain Color temp.
Color temp. G-Gain R-Gain 123
Options
B-Gain G-Gain 123
Language
All reset B-Gain 123
Information
All reset
∞
5
5 ∞
2 3
Menu
3
Options 1
Menu display
Image adj.
∞
Line display
Setting Menu display
Keystone
Color temp. Line display
PC2 (BNC)
Options Right Left rev.
Keystone
Top Bottom inv.
Language
PC2 (BNC)
RS-232C
Information
Sleep time
Options 2
5
∞
5 ∞
Menu Language
3
Image adj.
Setting English English
Color temp.
Deutsch Deutsch
Options EspaÒol EspaÒol
Language Italiano
Italiano
FranÁais
Information FranÁais
5 ∞
Note
Menu • The display languages of the menus are set to "English" when the projector
is bought. The display language can be selected from the following 6
Image adj.
Input VIDEO
Setting languages:
Switcher CH.0
Color temp. Source NTSC
" (Japanese)", "English (English)", "Deutsch (German)", "Español
Options
(Spanish)", "Italiano (Italian)" and "Français (French)". (Refer to page 45.)
Language
Lamp time 123 h
The language settings in the section are explained in "English".
Information
.
38
Submenus in Video Menu Mode
2 3
Image adj.
All reset?
Yes No
ENTER
5 ∞ 2 3
Position
ENTER
Disp.Posi. Menu
TV Cinema
4:3 16:9
12,12 ENTER
ENTER
5 ∞
Setting 2
123
ENTER Tracking
TV Cinema Screen 4:3 16:9
4:3 16:9 HDTV 1080i 1035i
Setting 1
ENTER ENTER
ENTER
5 ∞
Decoder
AUTO [ NTSC ]
Low Middle High
NTSC
NTSC4.43
PAL
SECAM
ENTER
5 ∞
2 3
Color temp.
15sec ON All reset?
5sec OFF
Yes No
ENTER
RGB YP P
B R
ENTER
Keystone 123
Options 2
Right Left rev. OFF ON
Top Bottom inv. OFF ON
RS-232C [bps] 9600 19200
Sleep time [min] 15 30 60 OFF
Options 1 ENTER
5 ∞
2 3
Quick Reference Guide for Video Menu Mode
Main Menu in Video Menu Mode (While receiving video-device-related signals)
Image adj. (Refer to page 47)
Brightness: Brightness of the video image being projected can be adjusted. (–30 to +30, 0*)
Contrast: Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
Sharpness: Sharpness of the video image being projected can be adjusted. (–5 to +5, 0*)
Color: Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
Tint: Tint of the video image being projected can be adjusted. (–30 to +30, 0*)
All reset: Resets above items to the factory set values.
Yes / No
Setting 1
Position
Video screen position and menu position can be adjusted.
Disp. Posi. / Menu
Image tone can be changed. TV*/Cinema (Suitable for the cinema programes)
Tone
50)
Aspect change Selectable aspect ratio, 4:3*/16:9.
Selectable color systems, Normally, set to AUTO. (Refer to page 44)
Decoder
(This item is displayed only when inputting VIDEO or Y/C.)
AUTO*/NTSC/NTSC4.43/PAL/SECAM
Setting 2 Press ENTER to enter the Setting 2 submenu
Tracking Normally, no adjustment is required. The lateral size and display area of video image can be
adjusted. (–128 to + 127)
Screen Selectable screen's aspect ratio. 4:3*/16:9
HDTV Selectable HDTV format. Normally, set to 1080i, 1080i*/1035i
Setting 1 Press ENTER to return to "Setting 1" submenu.
Color temp.
Color temp. Adjustable color temperature, Low/Middle*/High.
Will be adjusted to correct reddish or blueish image.
R-Gain
Adjusts the red leve. (0 to 255, the adjustable range varies depending on signals)
G-Gain Adjusts the green leve. (0 to 255, the adjustable range varies depending on signals)
B-Gain Adjusts the blue leve. (0 to 255, the adjustable range varies depending on signals)
All-reset
Reset above items to the factory set values.
Yes/No
Options (Refer to page 52)
Options 1
Menu display: 15sec* (Menu disappears in 15 seconds.) / ON (Menu stays on.)
Line display: 5sec* (Line display such as "VIDEO", "Y/C", "PC1", or "PC2" appears on top right of the screen for
5 seconds when the VIDEO or PC button is pressed.) / OFF (Line display does not appear.)
Keystone: Press ENTER to enter the Keystone submenu.
Keystone: Adjust to correct the trapezoidal distortion of the projected image.
(–80 to +128, 0*)
PC2 (BNC): RGB* or YP P . Set to RGB when a computer device with analog RGB, V, H/Cs signals is
B R
connected to the PC2 terminals. Set to YP
or DTV-format signals (Y, P
Options 2: Press ENTER to enter the "Option 2" submenu.
Right Left rev.: OFF* / ON (Select for upside-down hanging on the ceiling.)
Top Bottom inv.: OFF* / ON (Select for upside-down hanging on the ceiling.)
RS-232C [bps]: Selectable baud rate (transmission speed). 9600 / 19200*
Sleep time [min:] Selectable sleep times. If no-signal condition continues for the period of
selected time (Unite: Minutes), the projector enters the stand-by mode. 15 / 30
/ 60 / OFF*
Options 1: Press ENTER to return to the "Option 1" submenu.
Language Language for on-screen display.
Japanese / English* / German / Spanish / Italian / French
Information (Refer to page 54)
Input: Shows the terminal name selected by the VIDEO or PC button. (Y/C, VIDEO, or PC2)
Switcher: Has no meaning. This display currently has no meaning, ("CH.0" is usually displayed to indicate
that it is not being used.)
Source: Shows the projected image's type of video signal.
Lamp time: Accumulated used hours of the light-source lamp.
* : Factory set value.
Menu Operations
(Refer to page 49)
(Refer to page
(Refer to page 50)
(Refer to page 46)
(Refer to page 45)
(Refer to page 45)
P when a device with component signals (Y, B-Y, R-Y)
B R
, P ) are connected to the PC2 terminals.
B R
(Refer to page 45)
39