(Video Menu Mode Only); Adjusting Tracking / Phase; Adjusting Picture Quality - JVC DLA-M2000LU Operating Instructions Manual

D-ila projector

Hide thumbs Also See for DLA-M2000LU:

Manual (58 pages)

Instructions manual (73 pages)

Table Of Contents

Table of Contents

Enlarged version

Menu Operations

Adjusting Tracking / Phase

Normally, tracking and phase adjustments are automatically carried out when a video signal is input to the projector for the

first time, or when the QUICK ALIGN. button on the remote control is pressed.

However, you can manually adjust the tracking and phase on the menu.

Both tracking and phase can be adjusted in PC menu mode. In Video menu mode, only tracking is adjustable, though this

adjustment is not normally required.

If a wide stripe appears on the screen, adjust the lateral size of the picture image and the display area (tracking adjustment)

so the stripe disappears.

Also, if text projected on the screen appears flickers or appears dim, adjust phase adjustment so it becomes clear.

Press the MENU button.

The main menu appears on the screen.

Select "Setting" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.

The "Setting 1" (video mode) or "Setting" submenu appears on the screen.

In video mode:Select setting 2 with the cursor ∞ or 5, and press ENTER button.

The "Setting 2" submenu appears on the screen.

Video submenu

Setting 1

Setting 2

Position

ENTER

Tracking

123

Tone

Cinema

Screen

4:3

16:9

Aspect change

4:3

16:9

HDTV

1030i

1035i

Decoder

ENTER

Setting 1

ENTER

Setting 2

ENTER

Decoder is only displayed when there is a signal for the AV

IN terminal.

Select "Tracking" or "Phase" with the cursor button 5 or ∞ ∞ ∞ ∞ .

*"Phase" is shown only in PC submenu.

Adjust the tracking or phase with the cursor 2 2 2 2 or 3 3 3 3 .

Adjust the tracking and phase of the picture image being projected. To adjust the phase, first check for correct tracking

adjustment.

*To adjust multiple items, repeat 3 and 4.

Adjustment item

Button

The picture image shrinks laterally (right-to-left) or extends laterally (left-to-

2 or 3

Tracking

right). (–128

2 or 3

Phase

Set to a position where text appears clear. (PC menu mode only) (0

Press the ESCAPE button to return to the previous menu or press the MENU button

to exit the menu mode.

Note

• A dim image could be caused by insufficient adjustment of brightness and contrast. Before adjusting phase, make sure that

brightness and contrast are correctly adjusted. To adjust them, refer to "Adjusting Picture Quality" on page 47.

PC submenu

Setting

Tracking

123

Phase

Position

ENTER

Resize

1:1

Panel

Aspect

Clamp

Adjustment content

+127)

31)

Adjusting Picture Quality

In the "Image adj." submenu, adjust brightness, contrast, sharpness, etc. to obtain the desired picture quality. Note that the

adjustment items differ in Video menu mode and PC menu mode.

Press the MENU button.

The main menu appears on the screen.

Select "Image adj." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.

The "Image adj." submenu appears on the screen.

Video submenu

Image adj.

Brightness

Contrast

Sharpness

Color

Tint

All reset

ENTER

Select the item to be adjusted with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .

*"Color" and "Tint" are shown in Video submenu only.

Make adjustment with the cursor 2 2 2 2 or 3 3 3 3 .

*To adjust multiple items, repeat 3 and 4.

Adjustment item

Button

2 or 3

Brightness

Gets darker/brighter. (–30

2 or 3

Contrast

Gets lower/higher. (–30

Gets softer/sharper.

• Video menu mode: (–5

• PC menu mode: (1

2 or 3

Sharpness

Note

• When in the PC menu mode, if the resize function in the PC submenu is set to

"1:1", the image quality will not change even if the value is changed.

Gets softer/deeper. (–30

2 or 3

Color