Table of Contents
Advertisement
Menu Operations
Changing the Image Tone/Aspect Ratio (Video Menu Mode Only)
The image tone (TV or Cinema) and the aspect ratio (4:3 or 16:9) are selectable in Video menu mode.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Setting" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Setting 1" submenu appears on the screen.
Video submenu
Setting 1
ENTER
Position
Tone
TV
Cinema
Aspect change
4:3
16:9
Decoder
ENTER
Setting 2
ENTER
Decoder is only displayed when there is a signal for the Video IN terminal.
3
Select "Tone" or "Aspect change" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Adjust the image tone or aspect ratio with the cursor 2 2 2 2 or 3 3 3 3 .
*To adjust multiple items, repeat 3 and 4.
Adjustment item
Button
The image tone projected on the screen can be changed.
2 or 3
Tone
TV*
: Suitable for projecting the video programs.
Cinema : Suitable for projecting the cinema programs.
Sets the vertical-to-horizontal ratio (4:3 or 16:9) of the video image projected.
"4:3*" : The aspect ratio of the projected image becomes 4:3. Set it to 4:3 for video
2 or 3
Aspect change
of NTSC, NTSC4.43, PAL, SECAM.
"16:9" : The aspect ratio of projected image becomes 16:9. Set it to 16:9 for Hi-
Vision devices (W-VHS VCR, etc.).
* : Factory set value
5
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
50
Adjustment content
Changing the Image Size - Resize Function (PC Menu Mode Only)
The picture image projected can be selectable with the
Resize function which is available only in PC menu mode.
You can choose the video image size projected from the
following: (Factory setting is "Aspect".)
"1:1": The image is displayed at the input resolution. The
picture image projected is not enlarged even if its
number of pixels (resolution) is smaller than that of
the projector's D-ILA element (1365 pixels
1024
pixels).
Resize: 1:1
Panel: The picture image projected is virtually enlarged to
the full size (1365 pixels
1024 pixels). The
horizontal and vertical enlargement ratio will differ
depending on the original image and the image will
be deformed.
Resize: Panel
Aspect: While maintaining the original aspect ratio, the video
image projected is virtually enlarged until either the
horizontal or vertical side reaches the full size (1365
pixels
1024 pixels).
Resize: Aspect
Menu Operations
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Setting" with the cursor button
5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER
button.
The "Setting" submenu appears on the screen.
PC submenu
Setting
Tracking
123
Phase
12
Position
ENTER
Resize
1:1
Panel
Aspect
Clamp
ST
FP
BP
3
Select "Resize" with the cursor button
5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Choose "1:1", "Panel", or "Aspect"
with the cursor button 2 2 2 2 or 3 3 3 3 .
5
Press the ESCAPE button to return to
the previous menu or press the MENU
button to exit the menu mode.
Changing the Clamp pulse position
(PC Menu Mode Only)
When the image is too dark or bright, or when the image is
unstable, switching the position may improve the image
quality. Normally, set to "BP".
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Setting" with the cursor button
5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER
button.
The "Setting" submenu appears on the screen.
3
Select "Clamp" with the cursor button
5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Choose "ST", "FP", or "BP" with the
cursor button 2 2 2 2 or 3 3 3 3 .
5
Press the ESCAPE button to return to
the previous menu or press the MENU
button to exit the menu mode.
ST: Sync Tip
FP: Front Porch BP: Back Porch
51
Advertisement
Table of Contents
Troubleshooting
