Connecting To Video Devices; Connecting To Hi-Vision Devices - JVC DLA-M2000LU Operating Instructions Manual

D-ila projector
Hide thumbs Also See for DLA-M2000LU:
Table of Contents

Advertisement

Connecting to Various Devices

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.
• Read thoroughly the manual that comes with each video device.
• Use the supplied AV connection cable. An AV connection cable with an S-video (Y/C) terminal is not supplied.
Y/C
VIDEO
R
AUDIO
P
/R-Y
R
G
PC AUDIO
H
Y
B
V
P
/B-Y
B
REMOTE
RS-232C
Notes
• Connect a composite image signal output device or Y/C (S-video) image output device.
• When an image signal is input to the AV IN (VIDEO or Y/C) terminal, input the sound signal to the AUDIO terminal of the AV
IN terminals.
Memo
• When connecting a video device, use a TBC along with it, or one which has a built-in TBC.
• Use of an extension cable to connect a video device and the projector could cause video degradation.
• When a signal with much jitter is reproduced on a VCR, or special-effect playback is performed, the upper part of the image
or the image itself may be erased or distorted.
24
Video devices

Connecting to Hi-Vision Devices

Before connection, be sure to turn off both the projector and Hi-Vision devices.
• Read thoroughly the manual that comes with each Hi-Vision device.
• Use separately available BNC cables and audio cables to connect Hi-Vision devices.
R
P
/R-Y
R
G
Y
B
P
/B-Y
B
Hi-Vision devices
Notes
• Connect a component signal output device or DTV-format signal output device.
• When the PC2 input terminal is used, "PC2 (BNC)" must be selected from the menu options. Refer to "Setting and Adjusting
Other Functions (OPTIONS)" on page 52.
• When the image signal is input to the PC2 input terminal, input the sound signal to the PC AUDIO terminal.
Memo
• Other devices with component signal output terminals (DVD player (NTSC), etc.) can be connected.
(*DVD: Digital Video Disc)
• DTV-format signals (480i, 480p, 720p, 1080i) can be input. For DTV-format signals which can be handled, refer to "Video
signals" on page 22.
Connecting to Various Devices
Y/C
VIDEO
AUDIO
PC AUDIO
H
V
REMOTE
RS-232C
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dla-m2000le

Table of Contents