JVC DLA-G20 Sales Manual
JVC DLA-G20 Sales Manual

JVC DLA-G20 Sales Manual

D-ila series

Advertisement

Printed inJapan
XXX-0000

Advertisement

Table of Contents
loading

Summary of Contents for JVC DLA-G20

  • Page 1 Printed inJapan XXX-0000...
  • Page 2: Table Of Contents

    Contents D-ILA method What is the D-ILA multimedia projector? D-ILA features D-ILA method present condition and subject “Brightness” basics D-ILA resolution Installation conditions and throw distance Throw distance Table: Relationship between screen size and throw distance Stacking systems Projection type (front projection) Projection type (rear projection) Installation Operating precautions...
  • Page 3: D-Ila Method

    D-ILA method D-ILA multimedia projector? D-ILA Method Present Condition and Subject The “D-ILA method” is a method of picture projection that uses JVC’s original “D-ILA device”. Based on JVC‘s ILA ® projector which has more than a 40% share of D-ILA eliminates the trade-off between the high brightness the professional large-screen projector market, the “D-ILA device”...
  • Page 4: D-Ila Features

    As a result, large-screen projection capability can be (transmittivity of the light) is decreased, degrading the brightness. Newly-developed xenon lamp provided. JVC likes to refer to the D-ILA method as “the As there are lines to pass through video signals in the lattice LCD panel...
  • Page 5: D-Ila Method Present Condition And Subject

    1. Large screen for an event hall screen. As a result, brightness and resolution are limited, ing a more compact design JVC developed the D-ILA contrast, big-screen image far brighter than conventional 2. Higher brightness than in a movie theater resulting in an unsatisfactory tradeoff.
  • Page 6: Brightness" Basics

    The value of the light flux ( ) showing the projector’s to 340 . With the DLA-G20, on the other hand, meaning that illuminance is If the distance is doubled, light output varies depending on incidental conditions.
  • Page 7 Required contrast ratio 30 : 1 50 : 1 100 : 1 by “ANSI” (American National Standard Institute). The is not required. At present, the measurement method for Model DLA-G20 Reference/DLA-S15 DLA-G20 Reference/DLA-S15 DLA-G20 Reference/DLA-S15 Contrast D-ILA is measured according to the ANSI IT 7.228.
  • Page 8: D-Ila Resolution

    D-ILA resolution D-ILA Method Present Condition and Subject D-ILA resolution What is the difference between the D-ILA projector’s D-ILA multimedia projector (Quick Facts) “true S-XGA” capability and “S-XGA equivalent” capability Outstanding S-XGA full resolution offered by other projectors? 1280 S-XGA resolution = 1280 x 1024 dots S-XGA is a high-resolution display mode used by personal unable to handle all 1280 x 1024 pixels in an S-XGA XGA resolution = 1024 x 768 dots...
  • Page 9: Installation Conditions And Throw Distance

    ● For installation, consult your dealer. JVC is not responsible for any damages or injuries that may result from improper or faulty • The throw distance is from the end of the lens to the screen’s lower edge.
  • Page 10: Throw Distance

    Rough throw distance = screen width lens value Since the DLA-G20 incorporates a zoom lens, throw distance and projection screen size can be adjusted. Indications marked on the projection lens (such as 3:1) represent the “projection ratio”, that is, “throw distance: screen width”. When the screen width is “1”, the throw distance is ”3”.
  • Page 11: Screen Size And Throw Distance

    Table: Relationship between screen size and throw distance Use the table below as a guide. Use the table below as a guide. DLA-G20 DLA-G20 To obtain the throw distance from the projection size (projection ratio: 2:1 to 3:1) To obtain the projection size from the throw distance (projection ratio: 2:1 to 3:1)
  • Page 12: Stacking Systems

    Stacking systems Table: Relationship between screen size and throw distance Use the table below as a guide. 1. DLA-M4000 stacking system DLA-S15 When high-intensity projection capabilities are required, registration difference. This difference cannot be two DLA-M4000s can be stacked in a vertical or horizontal eliminated because it is caused by lens distortion.
  • Page 13 43.5 3657 2743 11.18 38.82 39.82 40.82 41.82 42.82 43.82 Be sure to take this into consideration when selecting the screen. Consult your JVC dealer for more information 3759 2819 10.88 39.12 40.12 41.12 42.12 43.12 44.12 regarding screen selection. The type of screen you use is especially important if you are using rear projection.
  • Page 14: Projection Type (Front Projection)

    Projection type (front projection) D-ILA Method Present Condition and Subject Stacking system 3. DLA-M4000 multi-system (side by side) Front projection Front projection systems project light directly onto a bright environment. (Nevertheless, even with the D-ILA Horizontal side-by-side placement of two DLA-M4000s is a screen.
  • Page 15 However, the absolute value for the gain at all angles is Recurrence means that the light reflects in the polarized light (JVC Fine Screen Pro) Is the fine beads screen the same as the beads type? higher in many cases. Therefore, it is risky to select a same direction as the angle of incidence.
  • Page 16: Projection Type (Rear Projection)

    (Refer to the table on page 10.) screen, most of the light is reflected because the light from projector or the DLA-G20/15 is used with another brand of screen, be sure to check the polarized light screen effect. the DLA-G20 consists mainly of vertical components.
  • Page 17 Projection type (rear projection) Range of adequate view Basic facts about reflecting mirrors The range of adequate view generally depends on the “viewing angle”. The rear screen for the JVC DB-70S10 data box is Mirror maximum available size is relatively small. Nevertheless, shown as an example.
  • Page 18 Projection type (rear projection) D-ILA Method Present Condition and Subject Projection type (rear projection) Basic facts about rear screens Types of rear screen Terminology As discussed in the section on front screens, the screen is an important factor in determining the final quality of the system. It is necessary to understand the features of the various types of screens.
  • Page 19: Installation

    6.5 kg “EF-G10CJ” ceiling hanging metal fittings). • The DLA-G20/DLA-S15 uses a high output lamp to obtain high intensity light. Therefore, it generates a lot of heat (540 kcal/h). Be sure The weight of these items could result in a serious or fatal injury if to install the projector in a well ventilated location or provide some form of air conditioning.
  • Page 20: Operating Precautions

    (at minimum, the amount shown on lamp cover. and pull the handle to remove the lamp also damage the lamp. JVC assumes no responsibility for any page 34). Without enough space, maintenance cannot be damage caused by this action.
  • Page 21 The lamp is mounted in a detachable housing for specified period of time, the sleep function automatically turns it method. easy replacement. For more information, consult your JVC dealer. Control from the switcher Suppose that a person with standard eyesight of 1.0 is off.
  • Page 22: System Design

    Serial: RS-232C mini D-sub 9 pins x 1 AUDIO AUDIO • The following 19 areas are preset for the DLA-G20 and DLA-S15. • When video signals are input, the area corresponding to them is selected and locked. H / Cs / B -Y •...

This manual is also suitable for:

Dla-s15Dla-m4000Dla-m15Dla-g15

Table of Contents