Table of Contents
Advertisement
Menu Operations
.
Image adj.
All reset?
Yes
No
5
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
Memo
In some adjustments, the level bar changes according to the set value. (The setting value is also displayed at the left of the
level bar.)
Adjusting Color temperature
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Color temp." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER
button.
The "Color temp." submenu appears on the screen.
3
Select "Color temp." with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ .
4
Adjust the color temperature with the cursor button 2 2 2 2 or 3 3 3 3 .
Low:
Color temperature decreases (image becoming reddish).
Middle:
Results in middle color temperature. (Factory set position).
High:
Color temperature increases (image becoming blueish).
5
Select "R-Gain" or "G-Gain" or "B-Gain" with the cursor button 5 or ∞ ∞ ∞ ∞ .
6
Fine adjust the color temperature with the cursor button 2 2 2 2 or 3 3 3 3 .
To adjust multiple items, repeat 5 and 6.
Adjustment item
Button
2 or 3
R-Gain
Adjusts the red level. (0 to 255)
2 or 3
G-Gain
Adjusts the green level. (0 to 255)
2 or 3
B-Gain
Adjusts the blue level. (0 to 255)
To perform All Reset
• In the Color temp. submenu, select "All reset" with the cursor button 5 or ∞, and press the ENTER button. Then, the "All
reset" submenu appears on the screen.
• Press the cursor button 2 to select "Yes", and then press the ENTER button.
• All items in the Color temp. submenu are reset to the factory set values and the menu returns to the previous one.
To exit the "All reset" submenu without performing All reset, select "No" with the cursor button 3 and, press the ENTER
button
7
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
48
Adjustment content
Adjusting the Video Screen/Menu Position
The position of the video screen and the menu on the video screen can be adjusted. You can finely adjust the video screen
position. The menu will move widely on the video screen.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Setting" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Setting 1" or "Setting" submenu appears on the screen.
Video submenu ("Setting 1" submenu)
Setting 1
Position
ENTER
Tone
TV
Cinema
Aspect change
4:3
16:9
Decoder
ENTER
Setting 2
ENTER
Decoder is only displayed when there is a
signal for the AV IN terminal.
3
Select "Position" with the cursor button 5 5 5 5 or ∞ ∞ ∞ ∞ , and press the ENTER button.
The "Position" submenu appears on the screen.
Position
Disp.Posi.
12,12
4
Press the ENTER button to select "Disp.Posi." or "Menu".
Disp.Posi. (Display Position):The video screen position (display position) can be adjusted.
Menu:The menu position can be adjusted.
5
Press the cursor button 5 5 5 5 , ∞ ∞ ∞ ∞ , 2 2 2 2 , or 3 3 3 3 to move the video screen (display) or the
menu.
*Repeat 4 and 5 to move both video screen (display) and menu positions.
Adjustment item
Button
2 or 3
Disp.Posi. - H
The video screen moves to the left or right. (–30
5 or ∞
Disp.Posi. - V
The video screen moves up or down. (–30
2 or 3
Menu - H
The menu moves to the left or right. (Left, center*, right)
5 or ∞
Menu - V
The menu moves up or down. (Top, center*, bottom)
* : Factory set value
6
Press the ESCAPE button to return to the previous menu or press the MENU button
to exit the menu mode.
Menu Operations
PC submenu (Setting submenu)
Setting
Tracking
123
Phase
12
Position
ENTER
Resize
1:1
Panel
Aspect
Menu
ENTER
Adjustment content
+30)
+30)
49
Advertisement
Table of Contents
Troubleshooting
