Connecting To Video Devices - JVC D-ILA DLA-M2000LU Instructions Manual

Connecting to Various Devices

Connecting to Video Devices

Before connection, be sure to turn off both the projector and video device.
• Read thoroughly the manual that comes with each video device.
• Use the supplied AV connection cable. An AV connection cable with an S-video (Y/C) terminal is not supplied.
Notes
• Connect a composite image signal output device or Y/C (S-video) image output device.
• When an image signal is input to the AV IN (VIDEO or Y/C) terminal, input the sound signal to the AUDIO terminal of the AV
IN terminals.
Memo
• When connecting a video device, use a TBC along with it, or one which has a built-in TBC.
• Use of an extension cable to connect a video device and the projector could cause video degradation.
• When a signal with much jitter is reproduced on a VCR, or special-effect playback is performed, the upper part of the image
or the image itself may be erased or distorted.
24
BNC-RCA
conversion plug
(accessory)
Y/C VIDEO
R
AUDIO
P /R-Y
R
G
PC AUDIO
H
Y
B
V
P /B-Y
B
REMOTE
AV connection cable
RS-232C
(accessory)
• VCR (Video cassette recorder)
• Laser videodisc player
• Camcorder
Video devices
To AV IN
S-video cable
(separately available)