Notes On Installation; Rack Mounting - Sony PMW-EX30 Service Manual

1-3-2. Notes on Installation

w
To avoid an injury, do not install the unit on rickety table.
Ventilation and Installation Space for Servicing
. Do not install the unit with the feet (four parts on the bottom) removed.
. In order to make a unit with good ventilation, ensure suffi cient clearance around the unit.
. Be sure to provide 2 cm or more space to both the right and left sides and the top of the unit, and 25 cm
or more space behind the unit.
. Do not install equipment on this unit.
n
Provide 2 cm or more space to both right and left sides of the unit. Providing 20 cm or more space above
the unit is recommended considering service operations.

1-3-3. Rack Mounting

Notes on Rack Mounting
. A rise in temperature inside the rack due to a residual heat by neighboring units will bad effects on the
unit. Check that the temperature inside the rack is within the range of specifi ed operating temperature of
the unit.
. When installing units side by side, leave 1 cm or more of space to the both side of each PMW-EX30.
. Leave 25 cm or more of space to the rear of the unit.
. Use a commercially available rack mount kit.
Select an appropriate shelf taking size and weight of the unit into consideration.
. Never remove the top and bottom panels, handle, or legs of the unit when installing.
. Use adequately long cables for connection of the connector panel, considering that the unit is pulled out
from the rack.
n
After rack mounting, check that the temperature inside the rack is within the range of 5 dC through 35 dC.
PMW-EX30
1-3