Connections And Installation; Connecting The Counter Modules - Sony MG10-P1 Manual

3. Connections and Installation

3-1. Connecting the Counter Modules

The type of counter module that can be connected is not limited.
Counter modules can be mixed and used in accordance with the
application. Up to 16 counter modules can be connected.
1
Remove the rubber cover installed over the counter module
connector on the right side panel of the main module.
6
(E)
2
Set the slide lock position as shown in the figure.
Install the first counter module into the main module so that
the counter module connector is aligned properly.
MG10-P1 / MG10-P2