Sony PMW-EX30 Service Manual page 40

Item5: System controller block diagnosis
System controller block diagnosis analyzes the following contents.
ID Diagnosis description
0x01 IIC communication test (clock IC)
0x02 IIC communication test (EEPROM)
0x03 IIC communication test (power supply microcomputer)
0x04 IIC communication test (sub-microcomputer of the inside
panel)
0x05 IIC communication test (sub-microcomputer of the handle)
0x06 IIC communication test (sub-microcomputer of
0x07 the rear panel)
0x08
0x09 IIC communication test (I/O expander)
0x0a
0x0b
0x0c
0x0d
0x0e
0x0f
When an error is detected in the IIC communication test, it indicates a possible failure in the communication line or device.
*: When an error is detected in the version matching test, upgrade again to a compatible version.
Contact your local Sony Sales Offi ce/Service Center for information on versions.
Item6: Power block diagnosis
Power block diagnosis analyzes the following contents.
ID Diagnosis description
0x01 Power switch readout
0x03 Power supply state
3-6
Error value
-1: Cannot readout battery
power switch
-4: Cannot diagnose since the
power switch is not set to
CAMERA
-1: Power supply is not con-
trolled correctly
-4: Cannot diagnose since the
power switch is not CAM-
ERA
Error value Type 1/2
-1: Error 1, 2
-1: Error 1, 2
-1: Error 1, 2
-1: Error 1, 2
-1: Error 1, 2
-1: Error 1, 2
-1: Error 1, 2
Type 1/2 Note
_
1, 2
_
1, 2
Note
_
_
_
_
_
_
_
PMW-EX30