Door Phones - Samsung OfficeServ 500 General Description Manual

DOOR LOCK RELEASE (PROGRAMMABLE)
After answering a call from the door phone, users can dial a code to activate a contact closure. This can be
used to operate a customer-provided electric door lock release mechanism. The contact closure timer is pro-
grammable from 100–2500 ms.

DOOR PHONES

The door phone interface module (DPIM) provides for connection of a door phone to a DLI port. Pressing the
button on the door phone produces a distinctive ring (three short rings repeated) at the assigned station or
station group. If not answered within a programmable time, the system releases the door phone and stops
the ringing. Stations may call the door phone directly and monitor the surrounding areas. Door phones fol-
low the system ring mode plan.
E & M TIE LINES (T1/COPPER)
Your office can be connected to another office with a tie line. Use it to make calls to stations in the other sys-
tem. If programming allows, you can access lines in the other system to make outside calls. Tie line calls can
be put on hold, transferred and conferenced in the same way as are other outside calls. Users accessing the
tie line from the other system can get a line in your system and make outgoing calls. These calls can be con-
trolled by assigning a dialing class to the tie line.Your local telephone company may use E&M tie lines to pro-
vide DID service. In this case these tie lines can be programmed to follow the DID translation table.
Translated E & M tie line calls have Ring Plan routing capabilities.
EXECUTIVE BARGE-IN (OVERRIDE)
The feature allows specially programmed stations with a barge-in key to override the automatic privacy of
another station or outside trunk. Programming allows barge-in with or without a warning tone. Stations may
also be programmed as "secure" so that they cannot be barged-in on.
With Warning Tone
When the barge-in with tone option is set, the barging-in keyset has its microphone on and the barged-in on
station receives an override display. A double burst of warning tone sounds and repeats every ten seconds.
This feature does not work from single line sets.
Without Warning Tone
When the barge-in without tone option is set, the barging-in keyset has its microphone muted and the
barged-in on station does not receive an override display. This feature does not work from single line sets.
Trunk Monitor or Service Observing
This feature allows the user who barged-in to retain the trunk call after the original station has hung up.
WARNING: BARGE-IN WITHOUT TONE MAY VIOLATE STATE OR FEDERAL LAWS CONCERNING THE RIGHT TO
PRIVACY. SAMSUNG TELECOMMUNICATIONS AMERICA IS IN NO WAY RESPONSIBLE FOR THE POSSIBLE MIS-
USE OF THIS FEATURE.
EXTERNAL MUSIC INTERFACES
The OfficeServ 500 MISC card provides two inputs for connecting to customer provided external music
sources. Each cabinet of the OfficeServ 500 can support one MISC card for a total of three cards or six sources
in a maximum sized system. These sources can be used to provide background music, or any of the varied
Music On Hold (MOH) uses.
4.16
See DID.