Samsung OfficeServ 500 General Description Manual page 24

iDCS 64B AOM
(See Figure 2–8)
• 64 programmable keys with red lights
• A maximum of 4 can be assigned to any keyset to provide addi-
tional programmable keys
• A maximum of 32 per system
• Available in dark gray or light gray
iDCS 14B STRIP
(See Figure 2–9)
• 14 programmable keys with red lights
• A maximum of one can be added to any 28D or 18D keyset to provide
additional programmable keys
• Available in dark gray or light gray
iDCS KDB-DIGITAL LINE INTERFACE (FKDBD)
This is a daughterboard that can be installed only in the 18 or 28 button keyset.The FKDBD will provide one addi-
tional DLI circuit for the connection of any digital station device such as a keyset, add-on module or DPIM. This
FKDBD will only operate when the keyset is connected to an 8 port DLI card so it can use the second B channel.
Each port on this card is intended for connection to one telephone. Connecting multiple telephones to a port
may result in incorrect operation or damage to the card.
Note: Only one KDB can be installed on a keyset.
iDCS KDB-SINGLE LINE INTERFACE (FKDBS)
This is a daughter board that can be installed only in the 18 or 28 button keyset.The FKDBS will provide one addi-
tional SLI circuit for the connection of any standard telephone device.This FKDBS will only operate when the key-
set is connected to an 8 port DLI card it can use the second B channel. Each port on this card is intended for con-
nection to one telephone. Connecting multiple telephones to a port may result in incorrect operation or damage
to the card.
Note: The circuitry on a FKDBS does not provide a loop open disconnect signal or have the over-voltage protec-
tion necessary for OPX operation. Only one KDB can be installed on a keyset.
2.12
FIGURE 2-8
FIGURE 2-9