Set Lengths For Code 39 - Motorola CS3000 Manual

Set Lengths for Code 39

Parameter # L1 = 0x12, L2 = 0x13
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 39 to any length, one or two discrete lengths, or lengths within
a specific range. If you enabled Code 39 Full ASCII, Length Within a Range or Any Length are the preferred
options.
NOTE When setting lengths, include a leading zero for single digit numbers.
One Discrete Length - This option limits decodes to Code 39 symbols containing a selected length. Select
lengths using the Numeric Bar Codes on page
characters, scan Code 39 - One Discrete Length, then scan 1, then 4. To change the selection or cancel an
incorrect entry, scan the
Two Discrete Lengths - This option limits decodes to Code 39 symbols containing either of two selected
lengths. Select lengths using the
symbols containing either 2 or 14 characters, select Code 39 - Two Discrete Lengths, then scan 0, 2, 1,
and then 4. To change the selection or cancel an incorrect entry, scan
Length Within Range - This option limits decodes to Code 39 symbols within a specified range. For
example, to decode Code 39 symbols containing between 4 and 12 characters, first scan Code 39 - Length
Within Range. Then scan 0, 4, 1, and 2. Select lengths using the
change the selection or cancel an incorrect entry, scan
Any Length - Scan this option to decode Code 39 symbols containing any number of characters.
4-48. For example, to decode only Code 39 symbols with 14
Cancel on page 4-50.
Code 39 - One Discrete Length
Numeric Bar Codes on page
Code 39 - Two Discrete Lengths
Code 39 - Length Within Range
Code 39 - Any Length
4-48. For example, to decode only Code 39
Cancel on page
Numeric Bar Codes on page
Cancel on page 4-50.
Symbologies 4 - 25
4-50.
4-48. To