Motorola CS3000 Series Reference Manual

Set Date and Time

NOTE You must scan the configuration bar codes to set the time and date stamp on the scanner. The time and
date can not be set or edited in the config.ini file. This setting persists for three months if the scanner is
not used.

Set Date

Scan the
Set Date
and Time Settings on page 3-6
NOTE To change the date format from mmddyy, see

Set Time

Scan the
Set Time
and Time Settings on page 3-6
two for the minute).
For example, to set the time to 8:45 in the morning, scan the following bar code, then scan 0, 8, 4, 5. To set the
time to 3:07 in the afternoon, scan 1, 5, 0, 7.
NOTE To change the time format between 12h and 24h, see

Cancel Date and Time Setting

Scan the
Cancel Set Date/Time
bar code, then scan six numeric digits in the format
(first two for the month, second two for the day, third two for the year).
bar code, then scan four numeric digits in the format
representing the time according to the 24 hour clock (first two for the hour, second
bar code to cancel the date and time settings.
mmddyy
DateFormat on page
Set Date
hhmm
TimeFormat on page
Set Time
Cancel Set Date/Time

User Preferences

from Numeric Bar Codes for Date
1-24.
from Numeric Bar Codes for Date
1-24.
3 - 5