Getting Started 1 - 23
Unpairing
To temporarily unpair the scanner and host, press the Bluetooth button. This disables Bluetooth and the
Bluetooth button stops blinking. Pressing the Bluetooth button again re-pairs the scanner with the host.
To permanently unpair the scanner and host, scan
Unpair on page
3-13. This allows the scanner to pair to a
different host device.
NOTE To enter batch scanning mode, the scanner cannot be paired to a Bluetooth host (applies to CS3070
model only).
Deleting the CS3070 from the Device List
To delete the device from the discovered devices list, tap and old the device and select
.
Delete
Deleting Device
Figure 1-33