Set Lengths For Codabar - Motorola CS3000 Manual

4 - 40 CS3000 Series Scanner Product Reference Guide

Set Lengths for Codabar

Parameter # L1 = 0x18, L2 = 0x19
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Codabar to any length, one or two discrete lengths, or lengths within
a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. For example,
select Codabar One Discrete Length, then scan 1, 4, to decode only Codabar symbols containing 14
characters. Select the length using the bar codes from
selection or cancel an incorrect entry, scan
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. For
example, select Codabar Two Discrete Lengths, then scan 0, 2, 1, 4, to decode only Codabar symbols
containing 6 or 14 characters. Select lengths using the bar codes from
change the selection or cancel an incorrect entry, scan
Length Within Range - Select this option to decode a code within a specified range. For example, to
decode Codabar symbols containing between 4 and 12 characters, first scan Codabar Length Within Range,
then scan 0, 4, 1 and 2 (include a leading zero for single digit numbers). Select lengths using the bar codes
from Numeric Bar Codes on page
page 4-50.
Any Length - Scan this option to decode Codabar symbols containing any number of characters.
Numeric Bar Codes on page
Cancel on page
Codabar - One Discrete Length
Cancel on page
Codabar - Two Discrete Lengths
4-48. To change the selection or cancel an incorrect entry, scan
Codabar - Length Within Range
Codabar - Any Length
4-48. To change the
4-50.
Numeric Bar Codes on page
4-50.
4-48. To
Cancel on