Set Date and Time
NOTE You must scan the configuration bar codes to set the time and date stamp on the scanner. The time and
date can not be set or edited in the config.ini file. This setting persists for three months if the scanner is
not used.
Set Date
Scan the
Set Date
Date and Time Settings on page 3-6
NOTE To change the date format from mmddyy, see
Set Time
Scan the
Set Time
Date and Time Settings on page 3-6
second two for the minute).
For example, to set the time to 8:45 in the morning, scan the following bar code, then scan 0, 8, 4, 5. To set the
time to 3:07 in the afternoon, scan 1, 5, 0, 7.
NOTE To change the time format between 12h and 24h, see
Cancel Date and Time Setting
Scan the
Cancel Set Date/Time
bar code, then scan six numeric digits in the format
(first two for the month, second two for the day, third two for the year).
bar code, then scan four numeric digits in the format
representing the time according to the 24 hour clock (first two for the hour,
bar code to cancel the date and time settings.
DateFormat on page
Set Date
TimeFormat on page
Set Time
Cancel Set Date/Time
User Preferences
from
Numeric Bar Codes for
mmddyy
1-26.
from
Numeric Bar Codes for
hhmm
1-26.
3 - 5