iPad Pairing Example
For CS3070 scanners, to pair to an iPad:
Press the scan button (+) to wake the scanner.
Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps
and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the host.
NOTE HID is the default profile for the CS3070. If this was changed, scan
On the iPad, tap the
from the list of options that appears.
. If Bluetooth is not enabled, swipe to enable it. The CS3070 appears in the
indicated by its model name and serial number.
Getting Started 1 - 21
Bluetooth HID Profile on page