Download Print this page

Advertisement

Click
. In order to complete the pairing, open a serial input application such as HyperTerminal. The
7.
Finish
CS3070 issues a two-tone beep and the Bluetooth button blinks slowly to indicate that the scanner paired
with the host.
NOTE Bluetooth pairing suspends temporarily while charging via a USB cable. Disconnecting the cable
automatically re-establishes the Bluetooth pairing.
Windows Mobile Device (Motorola ES400) HID Pairing Example
To pair to a Motorola ES400 Windows Mobile 6.5 device via HID:
Press the scan button (+) to wake the scanner.
1.
Press and hold the Bluetooth button (round button with Motorola logo) for five seconds. The scanner beeps
2.
and the Bluetooth button starts blinking quickly to indicate that the scanner is discoverable by the Motorola
ES400.
NOTE HID is the default profile for the CS3070. If this was changed, scan
On the ES400, launch the third party Bluetooth pairing application. Following is a sample window of such
3.
an application.
Sample Bluetooth Application - Add Device Window
Figure 1-16
Getting Started 1 - 13
Bluetooth HID Profile on page
3-13.

Advertisement

This manual also for:

Cs3070

Comments to this Manuals

Symbols: 0
Latest comments: